Cerrowire ReelRover, User'S Manual And Operating Instructions

Page: 21 / 48

21
Wire Take-up Process
The ReelRover may be used with four different wire take-up machines, and there is a take-up adaptor
required for each. The use of each take-up adaptor is described below with the associated take-up
machine.
Regardless of the take-up machine used, do not exceed the ReelRover weight limits.
WARNING : OVERLOADING THE REELROVER MAY CAUSE SERIOUS INJURY OR DEATH! DO
NOT EXCEED THE WEIGHT LIMITS
– MAXIMUM WIRE LOAD CAPACITY IS 2000 LBS. TOTAL
VEHICLE WEIGHT LIMIT IS 2700 LBS.
Inspect Left Gearbox Securing Bolt
The bolt visible in the ReelRover left gearbox hub, shown in Figure 21, secures the gearbox to the reel.
It is possible for the bolt head to be damaged by the take-up adaptor if the ReelRover has suffered a
separated gearbox-to-reel assembly.
Before every use of the ReelRover with a wire take-up machine, inspect the left gearbox bolt head to
check for gearbox-to-reel separation. This inspection is also part of the daily Equipment Inspection
Checklist (see
Equipment Inspection Prior to Use ).
This inspection applies to all ReelRover models.
All personnel moving and/or operating the ReelRover must be trained and aware of this warning, and
must properly inspect the ReelRover for a damaged bolt which may indicate a separated gearbox-to-reel
assembly.
WARNING : USE OF REELROVER WITH A SEPARATED GEARBOX-TO-REEL ASSEMBLY FOR
WIRE TAKE-UP OPERATION IS EXTREMELY DANGEROUS AND MAY RESULT IN INJURY OR
DEATH.
Figure 21: Left Hand Gearbox Securing Bolt