Cerrowire ReelRover, User'S Manual And Operating Instructions

Page: 33 / 48

33
Figure 46: Align Shaft and Hub
12. Pull out the black knob and remove the retaining pin from the adapter output shaft
13. Guide the male connector into the female hub of the ReelRover (Figure 47)
▪
If misaligned, rotate the reel of the ReelRover until alignment is reached
▪
Ensure that the connector is fully seated and is in line with the mating hub
▪
Angled connections may result in premature wear, failure, or injury
Figure 47: Connect Shaft and Hub
14. Engage Wemco 2500 reel lift lock (Figure 48)
Figure 48: Engage Reel Lift Lock
15. Operate the Wemco 2500 take-
up machine as outlined in the manufacturer’s machine operating
instructions: www.wemco-usa.com/catalog/sections/takeup_machines/instr_3.html
Remove ReelRover Adapter from Wemco 2500
1. Disconnect the Wemco 2500 from its power source
2. Release the motor slide lock and slide the motor to disengage the adapter (Figure 49, left)