CERNO Fons Floor Lamp Aassembly Instructions Download Page 1

Page: 1 / 4

Fons Floor Lamp

Assembly Instructions

General Product information

This product is suitable for indoor dry and damp locations only.

This product can be dimmed with most standard dimmers.

Items included

(Fons 10 shown)

Align holes
Drive wood and machine screws to secure the wood

body to the base. Cord must exit through cutout in met-

al plate at bottom of wood mast to avoid being pinched.

This portable luminaire has a polarized plug (one

blade is wider than the other) as a feature to reduce

the risk of electric shock. This plug will fit in a

polarized outlet only one way.

If the plug does not fit fully in the outlet, reverse

the plug. If it still does not fit, contact a qualified

electrician. Never use with an extension cord unless

plug can be fully inserted. Do not alter the plug.

IMPORTANT SAFETY INSTRUCTIONS

CERNOGROUP.COM

T: 949.715.1534

22892 GLENWOOD DRIVE, ALISO VIEJO, CA

Summary of Contents for Fons Floor Lamp

Page 1: ...tin met al plate at bottom of wood mast to avoid being pinched 1 1 This portable luminaire has a polarized plug one blade is wider than the other as a feature to reduce the risk of electric shock This...

Page 2: ...rt into the thin slot on top of the wood body The plug on the end of the cable should seat fully into the hole Raise tube necklace assembly and insert the first tube segment into the wood body until f...

Page 3: ...g shade and top diffuser installation install light bulb into socket NOTE To remove lower diffuser gently lift up one edge of the lower diffuser and carefully bend the diffuser until it can be removed...

Page 4: ...performance and resource efficiency with contemporary design Producing environmentally responsible products involves far more details than merely guaranteeing your products energy efficient performan...