Cermetek Microelectronics, Inc.
High Speed Internet Modem Family
2005 Cermetek Microelectronics, Inc.
Page 10
Document No. 607-0017-01 Revision A (05/05)
FCC REGISTRATION
All CH2165 iModem products are registered with the
FCC under Part 68. To maintain the validity of the
registration, notice of the restrictions the FCC places
on the iModem and its use must be served to the end
user of the product containing the iModem.
In addition to restriction notification, the FCC requires
that Cermetek make all repairs to all products in the
iModem family. If repairs are necessary after
installation of the iModem and the end product has
been delivered to the end user, the end product must
be returned to the end product supplier where the
iModem can be removed and then forwarded to
Cermetek for repair. The following notice is
recommended and should be included in the end
product’s user manual.
FOR YOUR USER’S MANUAL
The Part 68 rules require the following (or equivalent)
be provided to the end user of the equipment
containing an iModem device.
Type of Service:
The (insert end product name) is
designed to be used on standard device telephone
lines. It connects to the telephone line by means of a
standard jack called the USOC RJ-11C (or USOC
RJ45S). Connection to telephone-company-provided
coin service (central office implemented systems) is
prohibited. Connection to party lines service is subject
to state tariffs.
Changes in Attestation Procedure for Plugs and
Jacks:
(Name of applicant) attests that the network
interface plugs or jacks used on this equipment comply
with and will continue to comply with the mechanical
requirements specified in Part 68, Sub-part F,
specifically the dimensions, tolerances and metallic
plating requirements. The compliance of these
connectors will be assured by purchase specifications
and incoming inspection. Documentation of such
specifications and/or inspections will be provided by
the FCC within 30 days of their request for the same.
Telephone Company Procedure:
The goal of the
telephone company is to provide the best service it
can. In order to do this, it may occasionally be
necessary for the telephone company to make
changes to their equipment, operations or procedures.
If these changes might affect service provided to the
users or the operation of the user’s equipment, the
telephone company will give the user notice, in writing,
to allow the users to make any changes necessary to
maintain uninterrupted service.
In certain circumstances, it may be necessary for the
telephone company to request information from the
users concerning the equipment which the user has
connected to the telephone line. Upon request of the
telephone company, provide the FCC registration
number and the ringer equivalence number (REN);
both of these items are listed on the equipment label.
The sum of all of the REN’s on the user’s telephone
lines should be less than five in order to assure proper
service from the telephone company. In some cases,
a sum of five may not be useable on a given line.
Consult your telephone provider.
If Problems Arise:
If any of the user’s telephone
equipment is not operating properly, the user should
immediately remove it from the user telephone line, as
it may cause harm to the telephone network. If the
telephone company notes a problem, they may
temporarily discontinue service. When practical, they
will notify the user in advance of this disconnection. If
advance notice is not feasible, the user will be notified
as soon as possible.
When the user is notified, the user will be given the
opportunity to correct the problem and informed of
their right to file a complaint with the FCC. Contact the
local telephone service provider if any questions arise
concerning the telephone service.
In the event repairs are ever needed on the (insert
your product name), they should be performed by
(insert your company name), or an authorized
representative or (insert your company name). For
information contact: (insert your company address).
