V2.0
Slot Timout :
You can enter the slot time value here. When the distance is long or short, the
waiting time for packet transmission will be adjusted fast and slow.
Distance:
When the "Distance" button is clicked, the point-to-point bridge distance can be
entered. The system will automatically calculate the ideal reference value for the Slot Time and
ACK Timeout. The input distance is calculated in units (meters).
ACK Timout :
When waiting for the "ACKnowledgment frame" interval is too long to be received,
the ACK will be retransmitted. A higher ACK Timeout will reduce packet loss, but the
transmission efficiency will be poor.
HT Physical Mode
TX/RX Stream:
Build in 2.4GHz 2 antennas and support 2TX/2RX streams. Administrator can
select 1 or 2 TX/RX. The default is 2TX/2RX.
Channel Bandwidth:
The "
20/40
” MHz option is usually best. The other option is available for
special circumstances.
Extension Channel:
Sets channel select to Upper or Lower. The Upper supports 1 to 7 range
CH and Lower supports 5 to 11 range CH.
MCS:
This parameter represents transmission rate. By default (Auto) the fastest possible
transmission rate will be selected. You have the option of selecting the speed if necessary.
Setting Slot Time and ACK Timeout can strengthen the long-distance connection.
Changing the value can optimize the setting. If the value is too low, the length
transmission will be reduced. If the value is too high, there may be disconnection.
The 2.4Ghz antenna of this product thinks that it has a built-in 2x2. The default is already
set to 2T2R. If there is no special requirement, please keep the setting..
Summary of Contents for SEFA OW-500 A1
Page 75: ...V2 0 ...
Page 146: ...V2 0 ...
