background image

 
 

Thank you for the purchase of your Ceriatone Tweedle Dee guitar amplifier! 

 

Here, we hope to explain how best to use your new amp. 

 

Table of Contents 

1)

 

About the Tweedle D……...…………………………………………………………………………………………page 2 

2)

 

Quick setup……………………………………………………………………………………………………………page 3 

3)

 

Front Panel controls………………………………………………………………………………………………….page 4 

4)

 

Rear Panel controls…………………………………………………………………………………………………..page 6 

5)

 

Tube compliment……………………………………………..………………………………………………………page 8 

6)

 

Frequently Asked Questions………………………………………………………………………………………...page 9 

 

1) About the Tweedle Delight 
 

The release of our Overtone series of amplifiers has been overwhelmingly popular, and the support of customers such as you 
has instigated the release of currently over ten different versions within the series.  In addition, we have released the Klein-
ulator and C-lator effects loop interfaces specifically for use with our Overtone amplifiers.  We have been pleased to provide 
many players access to our unique take on these legendary amplifiers. 
 
A few years ago, information about a modified Tweed Deluxe was shared on the Internet.  The amplifier was modified by one of 
the most legendary and mythical amplifier builders in modern history.  Due to many, many requests we have decided to release 
our version of this unique amplifier.  The Tweedle Deelight has lineage in the 5C3/5E3 Deluxe amplifiers, but is faster, tighter, 
and has more headroom and a different harmonic footprint. 
 

Most importantly, we hope the Tweedle Dee fills the gap you have been searching for and becomes an integral part of your 
tone equation to exhilarate your playing and music. 
 
Rock on! 

-

 

Nik Azam 

Summary of Contents for Tweedle Delight












Reviews: