Ceriatone AFD 35, Manual, Page: 7 / 15

7
4) REAR PANEL CONTROLS
1) FX SEND ¼ ” instrument jack
2) FX RETURN ¼ ” instrument jack
3) SPEAKERS ¼ ” speaker jacks (x2)
4) OUTPUT SELECTOR three-way rotary selector
5) BIAS TEST probe jacks (x5)
6) PENTODE / TRIODE SWITCH 2-way toggle switch
7) MAINS IEC cable inlet
8) MAINS FUSE T2A slow blow fuse
9) HT FUSE T500mA fuse
FX SEND ¼ ” instrument jack can be used to directly interface the preamp of the AFD, thereby bypassing the power amplifier.
Conversely, this is usually used as the SEND of the effects loop. Plug the input of your effects unit, or interface device (ex – C-
lator, Klein-ulator) into this jack using
¼ ” instrument cable.
FX RETURN
¼ ” instrument jack can be used to directly interface the power amp of the AFD, thereby bypassing the preamp
and using the amplifier as a power amplifier. Conversely, this is usually used as the RETURN of the effects loop. Plug the
output of your effects unit, or interface device (ex – C-lator, Klein-ulator) into this jack using ¼ ” instrument cable.
SPEAKERS
¼ ” speaker cable jacks. Use a ¼ ” speaker cable to connect your speaker cabinet to the amplifier using these
jacks. If you use one speaker cabinet, either jack is acceptable.