Ceretone LAMBDA L1X, User Manual

Page: 10 / 28

To connect via Bluetooth (first time pairing):
❈ Remove BOTH Left & Right devices (both must be charged)
from the Charging Case
❈ Be sure Bluetooth is enabled on your phone. Go to the
Bluetooth setting on your phone and select “Pair New Device”
(wording on your particular phone may vary slightly)
❈ Search for the Bluetooth identifier of your device (“Smart
Buds”) and select it to pair (connect) - this may take up to 2
minutes
❈ Be sure to accept any prompts given regarding connecting
the device to your phone
❈ After successful connection, the blue light on the device will
flash once every six seconds instead of rapid blinking
Note: The above pairing only needs to be done one time with your
phone. After that, as long as your phone is nearby and Bluetooth is
enabled, the hearing aids will automatically reconnect when taken
out of the charging case.
II. BLUETOOTH CONNECTION
How To Use Your Device
8