4
4
Installation
The veto subwoofer reproduces the lowest frequency
range, thus unloading front speakers and increasing system
dynamics.
Human ear cannot locate where the veto frequency range
sound comes from, that is why the subwoofer can be
placed anywhere in the room. At the same time, please
take into account the following optimisation possibilities:
•
placing the subwoofer right at the wall or in the
corner can either unnaturally amplify low frequency
reproduction or cause rattling. Please place the
subwoofer at least 10 cm away from walls, avoiding
corners.
•
best result is achieved when placing veto in between
the front speakers. This way the subwoofer and the
other speakers will have even frequency ranges.
•
veto is an active system. Trouble free functioning of
the inbuilt amplifier requires constant cooling. For
this reason, please do not cover the housing.
Front Grill
Veto’s standard version is provided with a grey grill that
matches the aluminium casing. For individuality other grill
fabric colours are also available. Further information on this
subject is provided in our main catalogue. Your Ceratec
dealer will be happy to give you any advice, as well as help
you with changing the grill.
Assembly
Ceratec products are built to high standards in design,
functionality and workmanship. Traditional incompatibility
of beauty and sound is overcome due to a very elaborate
technology. And we suggest that specially trained qualified
personnel carry out assembly, installation and adjustment.
Personnel at your Ceratec dealer are instructed directly by
Ceratec as to how handling of our new products. Their
competence is beneficial to you as a customer. Only trained
specialists can get the maximum from your system. In this
case cost of the product is in particularly favourable ratio to
the result.
If you decide to do the assembly and installation yourself,
please follow instructions below. When in doubt, please
ask your Ceratec dealer for advice.
Lift the veto subwoofer carefully from the packaging.
Please keep in mind that it is significantly heavier than
other standard models and, therefore, it is advisable to ask
another person for help. Carefully put the subwoofer on a
soft surface upside down.
On the front side of the housing there is a faceplate that
can be pushed outwards. As soon as it is removed, you get
access to connectors and controls.
Then pull the cable through the big opening in the glass
stand and consider the following instructions and
information:
Controls and Connectors
Thanks to its active nature, veto offers many more options
for connection and adjustment than conventional models.
Please read carefully the following paragraphs. Should you
have any doubts, please do not hesitate to ask your Ceratec
dealer for help.