FibeAir® IP-20E
Installation Guide
Ceragon Proprietary and Confidential
Page 23 of 52
3.6
Connecting an Optical Fiber Cable and SFP
To connect an optical fiber cable and the SFP transceiver:
1 Use a pre-assembled cable.
2 Split the connector into two separate blue units (one for each wire).
3 Remove the gland cap and rubber from the gland body.
4 Slide the gland cap into the cable.
5 Slide the rubber into the cable.
6 Insert wires with connector one by one into the cable gland.
