FibeAir IP-20C/S/E
User Guide
Ceragon Proprietary and Confidential
Page 77 of 597
3.3.2.1 Adding and Removing Group Members
You can add and remove interfaces from the group after creating the group.
This is relevant if you want to delete a Multi-Carrier ABC group, since you
must remove the members individually before deleting the group.
To remove interfaces:
1 Select the group in the Multi-Carrier ABC table and click Add/Remove
Members. The abc-config-table - Add/Remove Members page opens.
Figure 48: Multi Carrier ABC Group - Add/Remove Members Page
2 Select a member in the Remove Member field.
Note:
Although you may select the Radio members in any order
you wish, member removal will not succeed unless Radio
slot 2 port 1 is removed first and Radio slot 2 port 2 is
removed second.
3 Click Apply.
4 Repeat these steps to remove additional members from the group.
3.3.3
Deleting a Multi-Carrier ABC Group
To delete a Multi-Carrier ABC group:
1 Select Radio > Groups > Multi Carrier ABC. The Multi Carrier ABC page
2 Select the group in the Multi-Carrier ABC table and click Add/Remove
Members. The abc-config-table – Add/Remove Members page opens
(Figure 48).
3 Remove each member of the group. See Adding and Removing Group
4 Click Close to close the Multi Carrier ABC – Add/Remove Members page.
5 Select the group and click Delete.
