FibeAir IP-20C/S/E
User Guide
Ceragon Proprietary and Confidential
Page 417 of 597
Table 116: Deleting Ethernet Service CLI Parameters
Parameter
Input
Type
Permitted
Values
Description
sid
Number
Any defined
Service ID.
The Service ID.
Examples
The following command deletes Service 10:
root>ethernet service delete sid 10
The following command deletes Services 10 through 15:
root>ethernet service delete sid 10 to 15
17.1.4
Configuring Service Points (CLI)
This section includes:
Service Point Classification (CLI)
Configuring Service Point Ingress Attributes (CLI)
Configuring Service Point Egress Attributes (CLI)
Displaying Service Point Attributes (CLI)
Deleting a Service Point (CLI)
17.1.4.1 Service Points Overview (CLI)
Service points are logical interfaces within a service. A service point is a logical
entity attached to a physical or logical interface. Service points define the
movement of frames through the service. Each service point includes both
ingress and egress attributes.
Each service point for a Point-to-Point or Multipoint service can be either a
Service Access Point (SAP) or a Service Network Point (SNP). A Point-to-Point
service can also use Pipe service points.
An SAP is equivalent to a UNI in MEF terminology and defines the
connection of the user network with its access points. SAPs are used for
Point-to-Point and Multipoint traffic services.
An SNP is equivalent to an NNI or E-NNI in MEF terminology and defines
the connection between the network elements in the user network. SNPs
are used for Point-to-Point and Multipoint traffic services.
A Pipe service point is used to create traffic connectivity between two
ports in a port-based manner (Smart Pipe). In other words, all the traffic
from one port passes to the other port.
Management services utilize Management (MNG) service points.
A Point-to-Point or Multipoint service can hold up to 32 service points. A
management service can hold up to 30 service points.
