FibeAir IP-20C/S/E
User Guide
Ceragon Proprietary and Confidential
Page 137 of 597
To configure Header De-Duplication and Frame Cut-Through:
1 Select Radio > Ethernet Interface > Configuration. The Radio Ethernet
Interface Configuration page opens.
For IP-20C units, the Radio Ethernet Interface Configuration page
initially displays a table as shown in Figure 93.
For IP-20S units, a page appears, similar to Figure 94 (which shows an
IP-20C page).
Figure 93: Radio Ethernet Interface Configuration Page
– IP-20C
2 For IP-20C units, select the carrier in the Radio Ethernet and Compression
table (see Figure 93) and click Edit. A separate Radio Ethernet Interface
Configuration page opens. The page is essentially identical to the IP-20E
and IP-20S page.
3 Click Edit. The Radio Ethernet Interface Configuration – Edit page opens.
Figure 94: Radio Ethernet Interface Configuration
– Edit Page Per Carrier – IP-20C
