Ceragon FibeAir IP-20C-HP, Installation Manual

Page: 152 / 204

Installation Guide for FibeAir IP-20C-HP
Page 152 of 204
Ceragon Proprietary and Confidential
Connecting the Combined OCU and Radio to the Branching
Pole Profile
Once the OCU and radio unit have been connected, mount the complete OCU-
radio unit to the Branching Pole Profile, as shown in
Figure 44 and Figure 45 .
1 Angle the nose of the OCU Rail so as to hook underneath the nose of the
Branching Pole Profile ( Figure 44 ).
3
8
2
Figure 44: Angling the OCU Rail Underneath the Nose of the Branching Pole Profile
2 Level the OCU-radio unit so that the nose of the OCU Rail is locked underneath
and inside of the nose of the Branching Pole Profile ( Figure 45 ).
3
8 2
Figure 45: Final Position of OCU-Radio Locked into Branching Pole Profile