User Guide for FibeAir® IP-20 All-Outdoor Products, CeraOS 10.5
Page 344 of 825
Ceragon Proprietary and Confidential
Figure 263: LLDP Configuration Parameters Page
2 Modify the configurable parameters, described in
3 Click
Apply
.
lists and describes the status parameters in the LLDP Configuration
Parameters page.
Table 59: LLDP Read-Only Configuration Parameters
Parameter
Definition
Max TX Credit
Displays the maximum number of consecutive LLDPDUs that can be
transmitted at any one time. In this release, the Max TX Credit is set at 5.
Fast TX Interval
(Seconds)
Displays, in seconds, the interval at which LLDP frames are transmitted
during fast transmission periods, such as when the unit detects a new
peer. In this release, the Fast TX Interval is set at 1.
Fast TX
The initial value used to initialize the variable which determines the
number of transmissions that are made during fast transmission periods.
In this release, the Fast TX No. is set at 4.
Reinit Delay
(Seconds)
Defines the minimum time, in seconds, the system waits after the LLDP
Admin status becomes Disabled until it will process a request to reinitialize
LLDP. For instructions on disabling or enabling LLDP on a port, see
Configuring the LLDP Port Parameters
In this release, the Reinit Delay is set at 2.
