Ceragon FibeAir IP-20 All-Outdoor Series, User Manual

Page: 336 / 825

User Guide for FibeAir® IP-20 All-Outdoor Products, CeraOS 10.5
Page 336 of 825
Ceragon Proprietary and Confidential
Figure 257: Logical Interfaces – Scheduler – Egress Port Scheduling Priority
3 In the Profile ID field, select from a list of configured scheduling priority
profiles. See Configuring Priority Profiles .
4 Click Apply , then Close .
7.7.5 Assigning a WFQ Profile to an Interface
To assign a WFQ profile to an interface:
1 Select
Ethernet > Interfaces > Logical Interfaces . The Logical Interfaces page
opens ( Figure 221 ).
2 Select an interface in the Ethernet Logical Port Configuration table and click
Scheduler . The Logical Interfaces – Scheduler page opens, with the Egress Port
Scheduling Priority Configuration – Edit page open by default ( Figure 257 ).
3 Select Egress Port Scheduling WFQ . The Egress Port Scheduling WFQ
Configuration – Edit page opens.