Ceragon FibeAir IP-20 All-Outdoor Series, User Manual

Page: 270 / 825

User Guide for FibeAir® IP-20 All-Outdoor Products, CeraOS 10.5
Page 270 of 825
Ceragon Proprietary and Confidential
Figure 199: Ethernet Service Points Page
You can choose to display the following sets of attributes by selecting the
appropriate button above the SP Attributes table:
• General – See Ethernet Service Points – General SP Attributes Table
• Ingress – See Ethernet Service Points – Ingress Attributes
•
Egress – See Ethernet Service Points – Egress Attributes
To return to the Ethernet Services page at any time, click Back to Services table at
the top of the Ethernet Service Points page.
Ethernet Service Points – General SP Attributes Table
The General SP Attributes table is shown in Figure 199: Ethernet Service Points
Page . Table 46 describes the parameters displayed in the General SP Attributes
table.
Table 46: General Service Point Attributes
Parameter Definition
Service point ID This ID is unique within the service. For Point-to-Point and Multipoint
services, the range of values is 1-32. For Management services, the range
of values is 1-30.
When adding a service point, you can select a service point ID from the
available options in the
Service point ID drop-down list in the Ethernet
Service Points – Add page. Once you have added the service point, you
cannot change the service point ID.
Service point name A descriptive name for the service point (optional). The Service Point
Name can be up to 20 characters.