Ceragon FibeAir IP-20 All-Outdoor Series, User Manual

Page: 261 / 825

User Guide for FibeAir® IP-20 All-Outdoor Products, CeraOS 10.5
Page 261 of 825
Ceragon Proprietary and Confidential
2 Enter the utilization threshold you want, in % (1-100). The default value for is
100.
3 Click Apply , then Close .
Table 43 describes the capacity and throughput PMs.
Note: To display the same parameters for a specific interval in a separate
page, select the interval in the PM table and click
View .
Table 43: Utilization PMs
Parameter Definition
Time interval index For 24-hour intervals, displays the date of the interval. For 15-minute
intervals, displays the date and ending time of the interval.
Peak utilization (%) Indicates the highest utilization of the radio capacity that occurred for
the selected radio or group during the measured time interval.
Average utilization (%) Indicates the average utilization of the radio capacity for the selected
radio or group during the measured time interval.
Seconds exceeding
Threshold Displays the number of seconds during the measured time interval
during which the L1 bandwidth exceeded the configured utilization
threshold.
Integrity Indicates whether the values received at time and date of the
measured interval are reliable. An x in the column indicates that the
values are not reliable due to a possible power surge or power failure
that occurred at that time.
5.6.9.3 Displaying Frame Error Rate PMs
To display frame error rate PMs per radio or Multi-Carrier ABC group:
1 Select
Radio > PM & Statistics > Traffic > Frame error rate . The Frame error
rate PM report page opens.