Ceragon FibeAir IP-20 All-Outdoor Series, User Manual

Page: 132 / 825

User Guide for FibeAir® IP-20 All-Outdoor Products, CeraOS 10.5
Page 132 of 825
Ceragon Proprietary and Confidential
Figure 75: Multi Carrier ABC Group - Add/Remove Members Page
2 Select a member in the Remove Member field or select Remove All .
Note: Although you may select the Radio members in any order you wish,
member removal will not succeed unless Radio slot 2 port 1 is
removed first and Radio slot 2 port 2 is removed second.
3 Click Apply .
4 Repeat these steps to remove additional members from the group.
3.3.5 Deleting a Multi-Carrier ABC Group
To delete a Multi-Carrier ABC group:
1 Select
Radio > Groups > Multi Carrier ABC . The Multi Carrier ABC page opens
( Figure 70 ).
2 Select the group in the Multi-Carrier ABC table and click Add/Remove
Members . The abc-config-table – Add/Remove Members page opens ( Figure
75 ).
3 Remove each member of the group. See Adding and Removing Group
Members .
4 Click Close to close the Multi Carrier ABC – Add/Remove Members page.
5 Select the group and click Delete .