User Guide for FibeAir® IP-20 All-Outdoor Products, CeraOS 10.5
Page 131 of 825
Ceragon Proprietary and Confidential
The minimum bandwidth threshold is based on the capacity of the
Multi-
Carrier ABC group, not the combined capacities of the group’s
members.
The group’s aggregated capacity is displayed in the Multi
-
Carrier ABC Group
–
Edit Group page (
You can configure Multi-Carrier ABC Minimum Bandwidth Override when creating
the group. See
Configuring a Multi-Carrier ABC Group
To configure Multi-Carrier ABC Minimum Bandwidth Override after the group has
been created:
1 Select the group in the Multi-Carrier ABC table and click
Edit Group
. The Edit
Group page opens.
Figure 74: Multi-Carrier ABC Group
–
Edit Group Page
2 In the
Minimum bandwidth
field, select
Enable
to enable Minimum
Bandwidth Override or
Disable
to disable Minimum Bandwidth Override.
3 In the
Minimum bandwidth threshold
field, enter the minimum bandwidth
override threshold (in Mbps). If the group’s bandwidth capacity falls beneath
this threshold, the group is automatically placed in
Down
state until the
bandwidth capacity exceeds this threshold.
4 Click
Apply
.
3.3.4
Adding and Removing Group Members
You can add and remove interfaces from the group after creating the group. This
is relevant if you want to delete a Multi-Carrier ABC group, since you must remove
the members individually before deleting the group.
To remove interfaces:
1 Select the group in the Multi-Carrier ABC table and click
Add/Remove
Members
. The Add/Remove Members page opens.
