OIL CLEANING
Dry Clean
Dry clean: First pull off mouthpiece
before cleaning. To dry clean simply
turn the device on for 20 seconds
and let the device cool off for another
20 seconds, repeat this cycle 3-5
times or until you see visible vapor
dissipate.
*Use caution with excessive cycles
as the heating core can become very hot, be
sure to let the core cool off between cycles.
20 Seconds on
20 Seconds off
Isopropyl Alcohol Soak
Unthread the heating chamber as described in “Basic
Operation”. Once removed get a container to hold the
Isopropyl Alcohol (91%+), place the Heating Chamber
in the container and make sure to fully submerge the
Chamber. Soak for 15-30 minutes and repeat if neces-
sary. We also recommend to rinse or to boil Chamber
after an Isopropyl soak. Once cleaned allow adequate
time to dry, we recommend to let dry overnight.
*Do not
to force dry using ovens or internal heating element, as this may
damage the heating element.
Boiling
Unthread the Heating Chamber as described
in “Basic Operation”. Place Heating Chamber
in boiling water for 15-30 minutes; repeat if
necessary. Once cleaned it is important to fully
dry out the Heating Chamber before use. *
Do
not to force dry using ovens or internal heating element, as
this may damage the heating element.
*Caution: Heating
Chamber can be
extremely hot
