Erection of RONDOTHERM feed air connection "at rear"
If the air feed is carried out from the rear, the rear side must be "opened" under the steel
jacket. In this case the opening has already been glazed and is only connected to the rear
panel walling with small webs. These webs have to be cut through so that the feed air
connection can be fitted from the rear.
Fitting the heat storage stones in the Rondotherm:
These webs have to
be cut through and
the panel has to be
removed so that a
feed air duct can be
fitted to the feed air
connection from the
rear
.
Then fix the
connection using
the two cheese-
head screws.
A feed air pipe can
now be connected
to this feed air
connection.
57
