8
Installation (continued)
5
Installing the mounting rod
6
Attaching the mounting brackets
to the TV
□
Position the mounting rod (A) over the
installation holes. Ensure that the rod (A) is
level.
□
Attach the mounting rod (A) to the wall using lag
bolts (CC) and washers (BB). Tighten with the
hex wrench (DD).
CAUTION
:
Tighten the lag bolts so that
the wall plate is firmly attached. Do not
overtighten. Over-tightening can damage the
screws, greatly reducing the holding power.
□
Place two knobs (GG) or a combination with
spacers (HH) over the two bottom holes on the
back of the TV and attach using the properly sized
screws (EE) and washers (FF).
□
Attach the mounting brackets (B) to the top two
holes on the back of the TV using the screws (EE)
and washers (FF) you identified in step 1.
CAUTION
:
Tighten the screws so the brackets
are firmly attached. DO NOT OVERTIGHTEN. This
may damage your TV.
7
Attaching the TV to the wall
□
Carefully hook the mounting brackets (B) over
the mounting rod (A).
□
Gently rest the spacers (GG) against the wall.
□
Connect the TV to any cables.
□
Secure the TV to the mounting rod (A) by pushing
the auto locker (1).
□
To remove the TV from the wall, pull on the rope
attached to the mounting bracket to release the
safety spring lock. Then carefully remove the TV.
A
BB
CC
DD
EE
FF
B
EE
A
S
RE
Q
UIRED
HH
FF
GG
GG
B
A
A
B
1
GG