8
FOLDING and STORING
1
To remove floorboard:
• Unfasten attachment straps.
• Remove floorboard and set
aside.
2
To unlock and raise floor:
• Push down on center of
Playard/Crib floor.
• Lift
Floor Handle
and
rotate in direction of
arrow (counterclockwise).
• Pull up on
Floor Handle
to raise floor.
Raise approximately
45.7 cm
(18 inches).
3
To fold top rails:
• Pull up on top rail slightly.
• Squeeze
Release Button
on bottom of top rail and
push rail down. (Release
buttons are identified by
printed arrows.)
Repeat for other sides.
NOTE:
• If rails are difficult to
unlock, raise center of
floor higher and
squeeze
Release
Button
again.
• If only one side of rail
folds, squeeze
Release
Button
again to fully
fold.
Playard/Crib
Release
Button
Floor
Handle
4
Gather Playard/Crib frame together
while pulling up on
Floor Loop
.
5
Wrap floorboard around
Playard/Crib frame with
padding facing in.
6
Secure
Attachment Straps:
• Bottom - Thread
Attachment
Strap
through
Leg Loop
then
through
Floorboard Loop
and fold back onto itself.
• Middle and Top - Thread
Attachment Straps
through remaining
floorboard loops
and fold back onto
themselves.
7
Stand Playard/Crib on end
and pull travel bag over
Playard/Crib.
Be sure
Handle
comes
through
Opening
in bag.
Turn over Playard/Crib and
zip bag closed.
Attachment
Straps
Handle
Opening
Floor Loop
Leg Loop
Floorboard Loop
Handle
