OPERATIONS and ADJUSTMENTS
12
Harness Straps:
• To tighten: Pull belt tab
(fig. a)
.
• To loosen: Lift lever on front of car seat
while pulling harness straps
(fig. b)
.
Harness Tie:
• To open: Press tab and pull apart
(fig. c)
.
• To close: Snap halves together. Make
sure harness tie is locked by pulling out
on each half.
Buckle:
• To lock: Insert both tongues into buckle.
Pull up on tongues to be sure they are
locked.
• To unlock: Press red button and pull
tongues out of buckle.
Tether Strap (fig. d):
• To tighten: Pull loose end of strap.
• To loosen: Lift adjuster
1
2
3
Changing Harness Strap Slots:
MUST
use slots
at
or just
above
shoulders.
A
Loosen harness straps:
• Lift lever on front of car seat.
• Pull harness straps.
B
Remove both harness strap loops from
Splitter Plate on back of car seat.
C
Change harness strap slots.
Make sure harness straps are threaded
through matching slot of seat pad and
car seat.
It may be necessary to remove seat pad
from top of car seat.
D
Put right strap loop on Splitter Plate first,
then attach left strap loop.
(fig. e)
.
Make sure each strap is securely attached.
E
Adjust harness straps to fit child
(see )
.
NOTE:
Make sure straps are
NOT
twisted.
5
1
4
