Century BND-60/U78, Manual

Page: 3 / 6

Press " CLOCK " and " PROG " at the same time
to reset the timer. LCD display will appear like
this icon.
1. Reset the timer
The built-in battery allows the programming and setup of timer to occur
from the comfort of your chair!
2.
Program timer
A.
INITIAL SETUP
B.
SET UP CURRENT DAY & TIME
1.
2.
3.
Press and hold the “ CLOCK ” button, then press the “ DAY ” button until
“Fr” displays on top of the screen. (Fig 01)
Press and hold the “
CLOCK ” button, then press the “ HOUR ” button
until 7:00am displays on the screen
.
(Fig 02)
Note
:
please pay attention to AM
/
PM
.
Press and hold “ CLOCK ” button, and press “ MIN ” button until 7:30am
displays on the screen
.
(Fig 03)
Example: if it is 7:30am Friday, please follow below steps to set
the current day and time.
Fig 01 Fig 02 Fig 03
C.
SET PROGRAM
1. Press the “
PROG ” button to enter the program
setting, you will see the picture.(Fig 04)
Fig 04