5. Safety
Before flying, please check to make sure no one else is operating on the same frequency.
Before flight, please check if the batteries or transmitter have enough capacity.
Before turning on the transmitter, please check to ensure the throttle stick is in the lowest position. IDLE switch is Off.
When turning on the unit, please follow the power on/off procedure. Power ON - Turn on the transmitter first and then turn
on the receiver. Power OFF - Turn off the receiver first and then turn on the transmitter. If this protocol is not followed,
control of the model may be lost.
Before operation, check movement of all controls are smooth and no linkages are binding. Carefully inspect servos for full
operation.
Check for missing, damaged, or loose items. Carefully inspect main rotor blades and tail blades for damage. If damaged,
replace with new ones to ensure a safe flight.
Check all ball links to ensure proper fitment. If loose, replace ball links with new ones.
Check servo plugs, ESC plugs, motor plugs, gyro plugs, and battery plugs to make sure they are securely fastened. A
loose plug may result in a complete lose of control over the model.
Check the tail belt tension to make sure the belt is not too lose. No more than 5mm movment when pushed inward.
Symbols used to help assist you in building the kit:
CA
THREAD LOCK
OIL
Whenever this symbol appears, use CA
(cyanoacrylate) glue.
Whenever this symbol appears, use
blue thread lock. (CN2025BS)
Whenever this symbol appears, use
grease.
B
Whenever this symbol appears, use red
thread lock. (CN2025RS)
THREAD LOCK
R
4. Before You Begin
Every attempt has been made to ease the assembly of your kit, at each step where there are complex instructions there are
detailed written instructions to walk you through each step. Remember to take a few minutes before each step to carefully
examine each process to become familiar with the parts and assembly before beginning that step. All hardware associated
with the part has been bagged and bundled together. When installing a part, make sure to open each bag individually to ease
construction of your Swift Carbon 620SE
5
Summary of Contents for Swift Carbon 620SE
Page 30: ...Notes ...
Page 31: ...Notes ...
