NEO 860C / 720C
Page 11
BUILD PHOTOS
Assemble the GPS saver cage together,
and install on top of the upper frame plate.
(Panel distribution board which should be at-
tached to the upper frame plate at this time
not shown).
Attach the upper frame plate along with “GPS
SAVER” to the lower frame assembly.
The 1/4” camera mount holes indicates the front
of the NEO Multi-Rotor.
12
13
14
Congratulations on finishing the build of the NEO Multi-Rotor. Please follow your instruction manuals on set-
ting up your transmitter and electronics.
