manualshive.com logo in svg

Century Heating CB00003, Installation And Operation Manual

The Century Heating CB00003 is a top-quality heating system designed to keep your space warm and cozy. To ensure proper installation and operation, make sure to download the free "Installation And Operation Manual" from manualshive.com. This manual provides all the necessary instructions for using your heating system effectively.

Share
Download
background image

Century FW2700 Installation and Operation Manual 

 

8 

2.2

 

General Features 

Maximum log length 

22 in (559 mm) east-west*   

Flue outlet diameter  

6 in (152 mm)  

Recommended connector pipe diameter 

6 in (152 mm)  

Type of chimney 

CAN/ULC S629, UL 103 HT (2100 °F) 

Baffle material 

Steel  

Approved for alcove installation 

Not approved  

Approved for mobile home installation

‡

 

Not approved  

Shipping weight (without option) 

312 lb (142 kg) 

Appliance weight (model with blower) 

267 lb (121 kg) 

Type of door 

Single, glass with cast iron frame 

Type of glass 

Ceramic glass  

Blower (CB00003 model) 

Optional (up to 100 CFM) 

Blower (CB00013 model) 

Included (up to 100 CFM) 

Particulate emission standard  

EPA / CSA B415.1-10 

USA standard (safety) 

UL 1482, UL 737 

Canadian standard (safety) 

ULC S627  

**

  East-west: through the door you see the longitudinal sides of the logs; north-south: through the door you 

see the tips of the logs. 

‡

  Mobile  home  (Canada)  or  manufactured  home  (USA):  The  US  department  of  Housing  and  Urban 

Development  describes “manufactured  homes” better known as “mobile  homes” as followed; buildings 
built  on  fixed  wheels  and  those  transported  on  temporary  wheels/axles  and  set  on  a  permanent 
foundation.  In  Canada,  a  mobile  home  is  a  dwelling  for  which  the  manufacture  and  assembly  of  each 
component  is  completed  or  substantially  completed  prior  to  being  moved  to  a  site  for  installation  on  a 
foundation and connection to service facilities and which conforms to the CAN/CSA-Z240 MH standard. 

 

Summary of Contents for CB00003
















































Reviews:

No comments

Related manuals for CB00003

KASTOR KS Series Installation And Usage Manual preview
KS Series
Brand: KASTOR Pages: 57
Saey 94 MF Installation And User Manual preview
94 MF
Brand: Saey Pages: 41
Jamestown J1000B Owner'S Manual preview
J1000B
Brand: Jamestown Pages: 98
hergom H-03/70 C Installation, Use And Maintenance Instructions preview
H-03/70 C
Brand: hergom Pages: 80
United States Stove US5522 Owner’S Instruction And Operation Manual preview
US5522
Brand: United States Stove Pages: 60
Ferroli SALERNO PELLET Assembly And Exploitation Manual preview
SALERNO PELLET
Brand: Ferroli Pages: 20
Breckwell SW2.0 Owner’S Instruction And Operation Manual preview
SW2.0
Brand: Breckwell Pages: 40
MCZ JAZZ Hydromatic 30 Acs H1 Installation Manual preview
JAZZ Hydromatic 30 Acs H1
Brand: MCZ Pages: 44
ADURO 14 User Manual preview
14
Brand: ADURO Pages: 92
ADURO 12 User Manual preview
12
Brand: ADURO Pages: 104
ADURO EN13240 User Manual preview
EN13240
Brand: ADURO Pages: 92
Clarke THAMES TRAVEL BARGE 6910115 User Manual preview
THAMES TRAVEL BARGE 6910115
Brand: Clarke Pages: 24
Campingaz 400 S Instructions For Use Manual preview
400 S
Brand: Campingaz Pages: 193
Daytona bemodern User Instructions preview
bemodern
Brand: Daytona Pages: 4
Residential Retreat DWS-327203 Owner'S Manual preview
DWS-327203
Brand: Residential Retreat Pages: 60
Bartscher 105978 Instruction Manual preview
105978
Brand: Bartscher Pages: 20
Bartscher 1509851 Instruction Manual preview
1509851
Brand: Bartscher Pages: 27
Coleman 502A Instructions For Use preview
502A
Brand: Coleman Pages: 2

Brands by name

Popular brands

Load more brands