25
e
f
During the first turn you should be able to turn the
RWS quick-release lever of the thru axle nearly
without resistance. If everything fits, turn the RWS
quick-release lever clockwise to pre-tighten the RWS
system
(e)
.
You will feel an increasing resistance at the lever.
Only turn the axle until it is hand-tight.
Open the RWS quick-release lever a little to bring it
into a favorable position. Turn the RWS quick-release
lever then into the desired position and re-close it to-
wards the hub.
Make sure the RWS quick-release lever at the fork
does not stand out to the front
(f)
.
Dismounting wheels
Turn the quick-release lever counterclockwise. Re-
lease the thru axle completely, hold the wheel in its
position and remove the axle from the hub.
G
Improperly mounted wheels may throw
you off your bike or result in serious ac-
cidents! If you have the slightest doubt
or in case of inquiries, contact your CENTURION
dealer.
G
After wheel mounting test the brakes at
standstill. You should reach the pres-
sure point of the brake before the brake
lever reaches the handlebars. In the case of hy-
draulic brakes pump them, if necessary, until you
reach a precise pressure point.
Summary of Contents for ROAD BIKE ISO 4210-2
Page 95: ......
