16
OPERATION
Get Started:
1. Snap the two fan base parts together.
2. Pass the tower fan through the slot and tighten the washer.
3. Place the fan with the fan Base on a flat and stable surface.
4. Connect the power plug to a wall outlet.
Maintenance:
1. Make sure that the switch is set to the “0” mode, then unplug the power plug
from the wall outlet.
2. Wipe the exterior of the fan with a damp towel.
Note:
Do not use any abrasive cleaning products or scouring pads to clean
any part of the fan. This may damage the surfaces of the fan.
Summary of Contents for FMP90
Page 1: ...INSTRUCTION MANUAL TOWER FAN FMP90 Svenska English Norsk...
Page 2: ......
Page 19: ......
