Centurion FMG43, Instruction Manual, Page: 17 / 28

English │17
OPERATION
1.
Speed control
The speed is controlled by a speed control switch. Simply push any of the
speed control buttons (1-2-3). To turn it off, push “0” button.
2.
Oscillation
Push down the oscillation knob and the fan will oscillate. Pull up and the fan
will not oscillate.
3.
Height adjustment
Loosen the height adjustment ring lock, then adjust the pipe to the desired
height and tighten the adjustment ring lock. The adjustable height is 1.05 m ~
1.30 m.
MAINTENANCE
1.
Use in a dry place, free of excessive humidity.
2.
When re-assembling the fan, make sure to follow the instructions for
“Installation“.
3.
Always remove the plug from the wall outlet and allow the fan to stop moving
before you start cleaning it.
4.
Clean the external surfaces of the fan with a soft damp (not dripping wet)
cloth.
5.
You can add a few drops of sewing machine oil to the base of motor shaft
after cleaning to extend the motor life.
6.
When the unit is not in use, make sure it is unplugged from the wall outlet.
7.
Store it in a cool and dry place until later use.
8.
In case of malfunction or doubt, do not try to repair the fan by yourself; it may
result in a fire hazard or electric shock.
Warning: Do not immerse the fan in water.
Warning: Do not use any cleaning chemicals such as detergents and abrasives.
Do not allow the interior to get wet as this could create a hazard.