page 33
www.CentSys.com
Parameter
Description
Unit
Minimum
Default
Maximum
Channel direction
Input; Output
Output
Mode
Pulsed; Latching;
Momentary
Momentary
Mappable channel
Channel 1; 2; 3
Channel 1
LCD backlight
brightness
%
0%
50%
100%
LCD backlight timeout
Mm:ss
00m:01s
00m:15s
01m:00s
LCD contrast
Level
1
30
50
TABLE 2
FIGURE 27
Menu 4.2. Backup and
Restore
Menu 4.2.1. Back up ALL to
USB
Allows all controller settings,
remote controls to be backed
up onto a USB device via the
Programming Console’s USB host.
A USB memory stick
(flash drive) is required to
perform this function.
To back up the system’s memory, follow this procedure:
1.
Insert a USB memory stick (flash drive) into the Programming Console’s onboard USB
host.
2. Press and hold the oblong button for a period of two seconds in order to access the
menu.
3. Using the directional arrows, scroll to Menu 4: General Options, and press the oblong
button to enter.
4. Press the down arrow once and use the oblong button to enter the Backup and
Restore sub-menu.
5.
The first option will be Backup All to USB. Again press the oblong button to confirm
your selection.
6. The system will prompt you as to whether you wish to proceed. Press the oblong
button to continue with the backup procedure.
7. Once all settings, logs, remotes, and actions have been copied across to the memory
stick, the words ‘DONE Backup Complete’ will be displayed on the screen.
8. All backed-ups are stored in the root directory in the following folder; SH_BACKUP
ELECTRICAL
S
ETUP
S
ECTION
8
