B.
Setting of Speed or Rcf(G) and acceleration or Decelleration (braking)
RCF O
Speed x 10
Speed shown (Example).
The speed shown is x 10 so is 4000 Rpm
O RPM
Accel
Decell
Function
Rcf/Rpm
1
Select if you require Speed or Rcf (G)
RCF (G) is the actual force that does the work for your analysis.
It is speed x the radius maximum of the Rotor that is the separation for analysis.
Press
Function
button and press the
Rcf/Rpm
it will pulse dot Left top Rcf and Bottom right RPM
2 Select the value you require by using the
or
Arrows
In increments of 10 Rpm or 10 Rcf(G)
3
Select your acceleration rate (9 is fastest 0 has no braking and is slowest)
Press
Function
and
Accel
increment from 0-9
4
Select your Decelleration rate (9 is fastest 0 is slowest)
Press
Function
and
Decell
increment from 0-9
............................................................................................................................................................................
C.
Selection of Time period
Time (Mins)
Select Time by pressing up or down arrow.
Time shown is 5 minutes (Example)
Memory
Memory
Memory
For “Pelleting” or fast separations up to 60 seconds
Use the
Pulse
button, when held down the timer counts up in seconds
Once your desired time is reached, release the button
Recall
Lid
Open
0 5
Pulse
(
Sec
)
Instructions ambient
ACCELL DECELL
0 4 0 0.
