Master controller settings
Motor 2 (Master)
controller
Motor 1 (Slave)
controller
Two synchronised gates opening
D5-Evo/D10 Synchronisation Diagram
Centurion Systems (Pty) Ltd
Doc number 0.07.D.0071_01032016 - ENGLISH
www.CentSys.com
Slave controller settings
Safety
External gate indication status................................ Indicator output.............. AUX IO
Closed indication............. Off
Partly closed indication..... Off
Closing indication............ Off
Partly open indication....... Off
Opening indication........... On
Open indication............... On
Pedestrian indication........ Off
Unknown indication.......... Off
Autoclose
Autoclose status................................................... On
Autoclose timer..................................................... 0 Seconds
• To open the gate fully, all triggering devices (remote controls, tag readers, keypads, intercoms, etc.)
must be programmed/connected to the Master controller.
• If the pedestrian function is required, connect the triggering device’s normally-open output to the
PED terminal on the Slave controller or, in the case of remote controls, learn the remotes to activate
the PED function on the Slave controller.
