1 4
5
Open lid (A) and position the three flame tamers (BF) above the
burners (BD) as shown. Place the two cooking grates (BG) above
the flame tamers.
BB
EA
CE
CH
BG
BF
BD
4
Assemble the upper brace (CH) below the control panel (CE) as
shown using hardware #6,#7 and #8 (x4).
Remove the screws and nuts from the top lid handle (AB), then
assemble the top lid handle (AB) to the top lid (AC) by using the
hardware which was just removed.
Fig. 4
Fig. 5
6
Attach the warming rack (BI) to the inside of the Burner Box as
shown. Make sure to insert the front 3 bars into the 3 holes of the
burner box rear panel (BH). Place the two legs of the warming rack
clip onto the edge of burner box weldment (BA).
BI
BA
Fig. 6
