INSTALLATION
TRANSMITTER
1. Insert the antenna wire into the antenna tube.
2. Connect the supplied AC/DC power adapter into an electrical wall outlet.
3. Plug the AC/DC power adapter into the DC jack located on the rear of the
transmitter.
4. When the AC adapter is plugged in, the red POWER LED illuminates. If the red
POWER LED does not illuminate, make sure the adapter is plugged in.
5. The rear of the transmitter has one audio cord that can be connected to the
players or to the headphone or earphone jack with the connector provided.
When the transmitter receives an audio signal, the blue SIGNAL LED and the red
POWER LED will illuminate together. If the blue SIGNAL LED does not illuminate,
ensure that the audio source is turned on.
VOLUME DOWN
VOLUME UP
POWER ON/OFF
AUTO TUNE
AUTO TUNE
VOLUME UP
VOLUME DOWN
POWER ON/OFF
REMOTE CONTROL
SPEAKER RECEIVERS
audio output jack of the TV, Monitor, VCR, Radio recorder, CD/MP3/VCD/DVD
