9
enabled mobile phones at the same time.
a. When the speakerphone is on, it will automatically search and connect the last 2 mobile phones
that have been connected before.
b. Under standby mode, press and hold “V+” button for 3 seconds until you hear a beep, then the
speakerphone will automatically connect the last 2 mobile phone that have been connected before.
(4) Using the Secondary Mobile Phone Through Speakerphone
When connected with 2 Bluetooth mobile phones, the first connected one is primary phone that can
use the “MFB” button for voice dial and redial. The second connected phone is secondary phone that
will use “V+” button for voice dial and redial.
a. Voice Dial: Press “V+” button once to activate the secondary phone’s voice dialing function.
b. Re-Dialing: Press “V+” button twice to redial the last outgoing number of secondary phone.
NOTE
:
(1) When the speakerphone is in Multipoint mode and connected to only 1 mobile phone, it can also enter
voice dial function by press “V+” button once, or make last outgoing number re-dialing by press “V+”
button twice.
(2) The Multipoint speakerphone can be paired with 2 mobile phones at the same time. When one of them
receives an incoming call, the other phone will be disconnected from speakerphone but resume
connection automatically after the first one has finished the phone call.
12. Low Voltage Protection of Battery
When the voltage of battery decreased to 3.3V, the red LED will flash in every 3 seconds, and the
speakerphone will be power off automatically when the voltage under 3.0V.
13. Restore to Default Setting
Please follow the steps below to reset the speakerphone to its original setting and remove all the previous
pairing and connection.
