Mixer
Face
R4
User Manual
17
Balanced Outputs (TRS)
While you may do most of your monitoring
with headphones, sometimes it’s good to
listen to the mix on larger studio monitors.
We have provided two 1/8” (3.5mm)
balanced outputs on the front panel. Use
these outputs to connect MixerFace R4 to
external powered monitors. The 3.5mm
outputs use industry-standard TRS pinout,
with “Hot” connected to the left (tip), “Cold”
connected to the right (ring) and “Common”
connected to the ground (sleeve) pin. A
special cable may be required. Consult the
CEntrance website for recommendations.
The top panel MONITOR knob adjusts the
level at both balanced outputs. This allows
you to control the level of your monitor mix
right from the MixerFace. No need to get up
and walk to adjust the monitors.
