PA168X IAX2 Phone User Manual (V1.42)
Beijing Centrality Communication Inc
18
●
use service: Enable/disable service by checking/clearing this box. To
make calls through Asterisk Server, please check this box; otherwise,
phone can only make IP-to IP calls.
●
service addr: If “use service” is checked, please set the URI of the
Asterisk Server into “service addr”.
●
register ttl : IP phone will send a keep-alive registration message to
Asterisk Server every “register ttl” seconds. The minimum value is 10,
maximum value is 65535.
Default is 60.
●
phone number: The local phone number of this phone, usually is
allocated by system.
●
account: With Asterisk Server system which requires authentication,
please put the username/account into this field.
●
pin: With Asterisk Server system which requires authentication, please
put the password into this field.
●
local port: The local UDP port registered with Asterisk Server to accept
incoming handshaking messages. The default port number is 4569.
●
dtmf: Set DTMF signal sending way by selecting inband audio, outband
audio from list box.