Line Interactive UPS 450VA/650VA/850VA
- 5 -
Installation and Operation
■
Inspect the UPS
Take out the UPS from its packaging and check for any damage that might
have occurred during shipping. If any damage is found, repack and return the
UPS to your dealer.
■
Choose where to place it
The place for installation of the UPS shall provide adequate vitalization or
airflow, and shall has no excessive dust, corrosive fumes nor conductive
contaminants. Do not operate your UPS in an environment with high ambient
temperature or humidity.
Furthermore, keep the UPS away from monitors at least 20cm to avoid
interference.
■
Recharge the UPS
This UPS has been shipped from the factory with its internal battery fully
charged. However, the charged level inevitably will be lost to certain degree
during shipping, and the battery should be recharged before plugging
anything to it. Just plug the UPS into a wall outlet for 6 hours to recharge it in
full.
