CENTRAL RESTAURANT PRODUCTS 69K-143 Service, Installation And Care Manual Download Page 4

Service and Installation Manual 

 

 

 

 

 

COMMERCIAL REFRIGERATION SAFETY 

Your safety and the safety of others are very important. 

 

We will provide important safety messages in this manual and on your appliance. 
Always read and obey all safety messages. 

 

Our product instructions will be uploaded on our company website. 

 

This is the Safety Alert Symbol. This symbol alerts you to potential hazards that can 
kill or injury you and others. All safety messages will follow the Safety Alert Symbol 
and either the words” DANGER”, “WARNING” or “CAUTION”. 

 

Danger means that failure to heed this safety 
statement may result in severe personal injury or 
death. 

 

Warning means that failure to heed this safety 
statement may result in extensive product 
damage, serious personal injury, or death. 

 

Caution means that failure to heed this safety 
statement may result in minor or moderate 
personal injury, or property or equipment damage. 

 

All safety messages will alert you to what the potential hazard is, tell you how to reduce the chance of injury, 
and let you know what can happen if the instructions are not followed. 

I

f the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly 

qualified persons in order to avoid a hazard. 

T

his appliance is not intended for use by persons (including children) with reduced physical, sensory or 

mental capabilities, or lack of experience and knowledge, unless they have been given supervision or 
instruction concerning use of the appliance by a person responsible for their safety. 

C

hildren should be supervised to ensure that they do not play with this appliance. 

T

his appliance can be used by children aged from 8 years and above and persons with reduced physical 

sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or 
instruction concerning use of the appliance in a safe way and understand the hazards involved. Children 
shall not play with the appliance. Cleaning and user maintenance shall not be made by children without 
supervision. 

K

eep the appliance and electrical its cord out of reach of children less than 8 years old. 

D

o not store explosive substances such as aerosol cans with a flammable propellant in this appliance. 

Summary of Contents for 69K-143

















Reviews: