SKU 99659
For technical questions, please call 1-800-444-3353.
Page 6
Attach all accessories properly to the
17.
tool before connecting the air sup-
ply. A loose accessory may detach or
break during operation.
Use this tool with both hands only.
18.
Using tools with only one hand can
result in loss of control.
Do not lay the tool down until it has
19.
come to a complete stop. Moving
parts can grab the surface and pull
the tool out of your control.
Vibration Precautions
This tool vibrates during use. Re-
peated or long-term exposure to vibra-
tion may cause temporary or permanent
physical injury, particularly to the hands,
arms and shoulders. To reduce the risk of
vibration-related injury:
Anyone using vibrating tools regu-
1.
larly or for an extended period should
first be examined by a doctor and
then have regular medical check-
ups to ensure medical problems are
not being caused or worsened from
use. Pregnant women or people
who have impaired blood circulation
to the hand, past hand injuries, ner
-
vous system disorders, diabetes, or
Raynaud’s Disease should not use
this tool. If you feel any medical or
physical symptoms related to vibra-
tion (such as tingling, numbness, and
white or blue fingers), seek medical
advice as soon as possible.
Do not smoke during use. Nico-
2.
tine reduces the blood supply to the
hands and fingers, increasing the risk
of vibration-related injury.
Wear suitable gloves to reduce the
3.
vibration effects on the user.
SAVE tHESE
InStRuCtIOnS.
FunCtIOnAl dESCRIPtIOn
Specifications
Electrical Rating
12 VDC / 20 A
Maximum Air Pressure 150 PSI
Output Capacity
1.23 CFM
Maximum Run-time
12-15 Minutes
ON/OFF Cycle Time
12 Min. Off / 15 Min. ON
InItIAl tOOl SEt uP/
ASSEMBlY
Read the EntIRE IMPORtAnt
SAFEtY InFORMAtIOn
section at the beginning of this
manual including all text under
subheadings therein before set
up or use of this product.
note:
For additional information regarding
the parts listed in the following pages,
refer to the Assembly Diagram near
the end of this manual.
unpacking
When unpacking, make sure that
the item is intact and undamaged. If any
parts are missing or broken, please call
Harbor Freight Tools at the number shown
throughout the manual as soon as pos-
sible.
This air tool may be shipped with a
•
protective plug covering the air inlet.
Remove this plug before set up.
