Page 2
SKU 98189
For technical questions, please call 1-800-444-3353.
sAVe tHis MAnuAl
Keep this manual for the safety warn-
ings and precautions, assembly, operat-
ing, inspection, maintenance and cleaning
procedures. Write the product’s serial
number in the back of the manual near the
assembly diagram (or month and year of
purchase if product has no number). Keep
this manual and the receipt in a safe and
dry place for future reference.
safety Alert symbol and signal
Words
in this manual, on the labeling, and all other
information provided with this product:
this is the safety alert
symbol. it is used to alert
you to potential personal
injury hazards. obey all
safety messages that
follow this symbol to avoid
possible injury or death.
dAnger indicates
a hazardous
situation which, if not
avoided, will result in death or
serious injury.
WArning
indicates a
hazardous situation which, if
not avoided, could result in
death or serious injury.
cAution, used
with the safety
alert symbol, indicates a
hazardous situation which, if
not avoided, could result in
minor or moderate injury.
notice is used to
address practices
not related to personal injury.
cAution, without
the safety alert
symbol, is used to address
practices not related to
personal injury.
iMportAnt sAFetY
instructions
instructions pertAining
to injurY to persons
WArning
– When using this Air Recip-
rocating Sander, basic precautions
should always be followed, including
the following:
general
to reduce the risks of injury to
a.
persons, read all the instructions
before using this Air reciprocating
sander.
Specific
Always wear ANSI-approved safety
1.
goggles, NIOSH-approved respirator
or dust mask, and heavy-duty work
gloves during use.
Inspect before each use; do not use
2.
if parts are loose or damaged. Have
the Air Reciprocating Sander repaired
before using if anything abnormal is
found.
Keep free hand clear of moving parts.
3.
Do not exceed 90 PSI air pressure.
4.
