Page 4
For technical questions, please call 1-888-866-5797.
Item 95211
Functional Description
Specifications
Hose Length
20'
Maximum Air Pressure
250 PSI
Air Inlet and Outlet
1/4″ -18 NPT
Components and Controls
Hose
Hose Stopper
Reel
Reel Cover
Roller Guide
(opening in Reel Cover)
Mounting Bracket
Inlet from
Compressor
Outlet to tool
Figure A
Initial Hose Reel Setup
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
Note:
For additional information regarding the parts listed in the following pages,
refer to the Assembly Diagram near the end of this manual.
Mounting Reel
1. Choose a mounting location that is free of electrical
wiring or other obstructions, and is sturdy enough
to support the weight of the Reel and hose as
well as the force used to extend and retract it.
2. Mark the center of the Mounting Bracket bolt
holes in the desired mounting location.
3. Check for hidden wiring, then, drill holes to
accommodate the bolts (not included).
4. Mount the Reel and secure in place with the bolts.
SAFETY
OPERA
TION
MAINTENANCE
SETUP
