background image

Page 2

For technical questions, please call 1-800-444-3353.

Item 69450 

        

table of Contents

Safety ......................................................... 2
Specifications ............................................. 6
Setup .......................................................... 7
Operation ................................................... 10

Maintenance .............................................. 11
Parts List and Diagram .............................. 14
Warranty .................................................... 15

WaRninG SYmBOlS anD DEFinitiOnS

This is the safety alert symbol.  It is used to alert you to potential personal injury hazards.  

Obey all safety messages that follow this symbol to avoid possible injury or death.

Indicates a hazardous situation which, if not avoided,  

will result in death or serious injury.

Indicates a hazardous situation which, if not avoided,  

could result in death or serious injury.

Indicates a hazardous situation which, if not avoided,  

could result in minor or moderate injury.

Addresses practices not related to personal injury.

Symbol

Property or statement

PSi

Pounds per square inch of pressure

CFm

Cubic Feet per Minute flow

SCFm

Cubic Feet per Minute flow 

at standard conditions

nPt

National pipe thread, tapered

nPS

National pipe thread, straight

WARNING marking concerning  

Risk of Eye Injury.  Wear ANSI-approved 

safety goggles with side shields.

Symbol

Property or statement

Warning marking concerning  

Risk of  Puncture Injury.  

Wear heavy-duty work gloves.

Read the manual before 

set-up and/or use.

WARNING marking concerning  

Risk of Hearing Loss.   

Wear hearing protection.
WARNING marking concerning  

Risk of Respiratory Injury.  Wear 

NIOSH-approved dust mask/respirator.

WARNING marking concerning 

Risk of Explosion.

table a:  Symbol Definitions

Sa
FE

tY

O

PER
ati

O

n

m

aint

Enan
CE

SE

tu

P

Summary of Contents for 69450

















Reviews: