Page 6
SKU 36567
For technical questions, please call 1-800-444-3353.
those dust masks that are specially designed to filter out microscopic particles.
(California Health & Safety Code 25249.5, et seq.)
14.
WARNING! The warnings, precautions, and instructions discussed in this
manual cannot cover all possible conditions and situations that may occur. The
operator must understand that common sense and caution are factors which
cannot be built into this product, but must be supplied by the operator.
ASSEMBLY AND OPERATING INSTRUCTIONS
NOTE: For additional references to the parts listed in the following pages, refer to the
Assembly Diagram on page 10.
To Attach A Quick Connector:
1.
WARNING! Prior to performing any assembly and/or adjustment
procedures, make sure the air supply hose is disconnected from the
Shear.
2.
Prior to use, the Shear requires the attachment of a
Quick Connector
(not
included) into its Air Inlet (29). To do so, wrap approximately 3” of pipe thread
sealer tape (not included) around the male threads of a Quick Connector.
Then, firmly tighten the Quick Connector into the Air Inlet. (See Figure A.)
FIGURE A
RECOMMENDED COMPRESSED AIR SYSTEM SETUP
ATTACH
QUICK CONNECTOR
TO SHEAR
36567 manual.pmd
11/19/2007, 7:44 AM
6
Brought to you by Augusta Flint