background image

Page 2

SKU 32871 For technical questions, please call 1-800-444-3353.

SPECIFICATIONS

 

Free Speed 

4500 RPM

 

Air Inlet  

¼” NPT

 

PSI 90

 

CFM 7

 

Torque 

*500 maximum ft-lbs.

SAVE THIS MANUAL

You will need the manual for the safety warnings and cautions, assembly instructions, operating 

procedures, maintenance procedures, trouble shooting, parts list, and diagram. Keep your invoice 

with this manual. Write the invoice number on the inside of the front cover. Keep both this manual 

and your invoice in a safe, dry place for future reference.

SAFETY WARNING & CAUTIONS

WARNING: 

When using pneumatic equipment, basic safety precautions should always be 

followed to reduce the risk of personal injury and hazards due to over pressurization. 

READ ALL INSTRUCTIONS BEFORE USING THIS TOOL!

1. 

KEEP WORK AREA CLEAN.

 Cluttered areas invite injuries.

2. 

OBSERVE WORK AREA CONDITIONS. 

Do not use tools in damp, wet, or poorly lit  

 

 

locations. Don’t expose to rain. Keep work area well lit. Do not use electrically powered air    

 

compressors in the presence of flammable gases or liquids.

3. 

KEEP CHILDREN AWAY.

 Children must never be allowed in the work area. Do not let them  

 

handle machines, tools, or hoses.

4. 

STORE IDLE EQUIPMENT. 

When not in use, tools must be locked up in a dry location to    

 

inhibit rust. Always lock up tools and keep out of reach of children.

5. 

DO NOT FORCE THE TOOL.

 It will do the job better and more safely at the rate for which    

 

it was intended. Do not use inappropriate attachments in an attempt to exceed the tool’s    

 capacities.

6. 

USE THE RIGHT TOOL FOR THE JOB. 

Do not attempt to force a small tool or  

 

 

 

attachment to do the work of a larger industrial tool. Do not use a tool for a purpose for  

 

 

which it was not intended.

7. 

DRESS PROPERLY.

 Do not wear loose clothing or jewelry as they can be caught in  

 

 

moving parts. Non-skid footwear is recommended. Wear restrictive hair covering to contain   

 

long hair.

8. 

USE EYE AND EAR PROTECTION.

 Always wear ANSI approved chemical splash goggles  

 

when working with chemicals. Always wear ANSI approved impact safety goggles at other    

 times.

REV 04/06

Summary of Contents for 32871













Reviews: