Central Machinery 97896 Operating Instructions Manual Download Page 9

Page 9

For technical questions, please call 1-800-444-3353.

SKU 97896 

        

and shoulders.  To reduce the risk of 

vibration-related injury:
Anyone using vibrating tools regularly 

1. 

or for an extended period should first 

be examined by a doctor and then have 

regular medical check-ups to ensure 

medical problems are not being caused 

or worsened from use.  Pregnant 

women or people who have impaired 

blood circulation to the hand, past hand 

injuries, nervous system disorders, 

diabetes, or Raynaud’s Disease should 

not use this tool.  If you feel any medical 

or physical symptoms related to vibration 

(such as tingling, numbness, and white 

or blue fingers), seek medical advice as 

soon as possible.
Do not smoke during use.  Nicotine 

2. 

reduces the blood supply to the hands 

and fingers, increasing the risk of 

vibration-related injury.
Wear suitable gloves to reduce the 

3. 

vibration effects on the user.
Use tools with the lowest vibration when 

4. 

there is a choice between different 

processes.
Include vibration-free periods each day 

5. 

of work.
Grip tool as lightly as possible (while still 

6. 

keeping safe control of it).  Let the tool 

do the work.
To reduce vibration, maintain the tool 

7. 

as explained in this manual.  If any 

abnormal vibration occurs, stop use 

immediately.

  SAVE THESE 

inSTrucTiOnS.

Summary of Contents for 97896





















Reviews: