SKU 94652
For technical questions, please call 1-800-444-3353
PAGE 17
from the Saw Blade (35) when performing this procedure.
B. Pull the Fence (8) assembly away from the Table (6). Then, open the Body
(32) to expose the Upper Wheel (87) and Lower Wheel (42).
(See Figure M.)
C. Release Saw Blade (35) tension by turning the Blade Tension Adjusting Knob
(97) counterclockwise.
(See Figure M.)
D. Remove the Table Insert (7) from the Table (6). (See Figure M.)
E. Slip the old Saw Blade (35) off the Upper Wheel (87), Lower Wheel (42),
Blade Guide Housing (25), and out through the slot in the Table (6).
(See Figure M.)
F. Insert the new Saw Blade (35) through the slot in the Table (6), into the Blade
Guide Housing (25), and onto the Upper Wheel (87) and Lower Wheel (42).
IMPORTANT: Make sure the Saw Blade teeth are pointing downward,
toward the Table. (See Figure M.)
G. Replace the Table Insert (7). (See Figure M.)
H. Increase Saw Blade (35) tension by turning the Blade Tension Adjusting Knob
(97) clockwise.
(See Figure M.)
UPPER WHEEL (87)
LOWER WHEEL (42)
BLADE GUIDE HOUSING (25)
SAW BLADE
(35)
BLADE TENSION ADJUSTING KNOB (97)
TABLE INSERT
(7)
TABLE
(6)
(TOP VIEW)
FIGURE M
BODY (32)
